Joy Sport Basic Pro User Manual page 19

STEP 4
1. Place 50mm square cap (41) into both ends of leg extension / arm curl bar (14).
2. Attach seat assembly (13) to verticle beam (10), with bolts (50), nuts (63) and washers
(68) asshown.
3. Attach leg extension / arm curl bar (14) to seat assembly (13).
4. Attach back seat (20) to verticle beam (10) as shown.
5. Attach seat (19) to seat assembly (13) as shown.
6. Slide pad holders (32) into the hole provided.
7. Slide leg extension/curl pads (29) onto pad holders (32).
8. Place 1'' round cap (40) into pad holders (32).
8