Operation Modes
This camera system has three operation modes - Camera mode, Media mode and USB mode.
Operation Mode
Camera Mode
Media Mode
USB Mode
This is the camera shooting mode. The camera system starts up in
●
Camera mode when the power is turned on.
Press the [REC] trigger button to start recording.
●
Memo :
The fan is turned on to protect inside of the video unit.
●
Avoid shooting with the microphone heading towards the video unit,
as operating sounds may be recorded.
This mode allows you to play back or delete clips recorded on the SD
●
card.
Press and hold the [CAM/MEDIA] button to enter Media mode when
●
you are not shooting in Camera mode. Once the camera system is in
Media mode, thumbnails of the selected media slot are displayed.
Memo :
●
recorded with this unit.
●
SD card to the PC.
When the camera system is connected to a USB cable, the message
●
"Change to USB Mode?" appears.
Select [Change] and press the Set button to switch to USB mode.
In USB mode, the camera system is recognized by the connected PC
●
as a peripheral drive. (USB mass storage class only)
Disable the connection on the PC and remove the USB cable from the
camera system to switch to Camera mode.
Memo :
When a USB cable is connected during recording, the message
●
appears after recording stops.
●
closed automatically, such as when playback stops.
Files on the PC cannot be written to the SD card.
●
Description
24