Table of Contents
Advertisement
Daily handling
Switching on/off
Your TV set is equipped with an eco-standby
power supply unit. The power consumption drops
to low power in standby mode. If you want to
save even more energy, switch the set off with
the On/Off switch. However, please note that
EPG data are then lost and timer recordings
programmed on the TV set will not be carried
out.
If the TV is switched on, you can
switch it off with the blue On/
Off button on the remote
control. The red standby LED on
the set lights up. If the green
LED also lights, a timer
recording is in progress, EPG
data is being acquired or radio
mode without screen display is
active.
From standby it is best to switch
back on with the blue On/Off
button or with a numeric key
(station 0-9). The green
operating LED then lights up.
When you switch on the TV with
OK
OK, you see the station table
and can choose a station.
Switch on in the radio mode.
The indicator and the switch are combined into
one unit.
None of the indicators lights up
when you switch off the TV set
with the On/Off button on the
set.
Switch on the TV set with the
On/Off button on the set when it
is switched off.
10
BAQ25H_29792_022_4_GB
Changing channels
With the numeric keys on the remote control
The set has a dynamic memory with 220/with DVB
1470 memory slots. If up to 9 stations are stored,
you only need to enter one number, up to 99 two
numbers, up to 999 three numbers and above 999
four numbers (please look in the station table to
find out how many stations have been stored).
7
long
2 7
short long
1
2 7
short short long
1 2 7 8
all short
Depending on how many stations have been
stored, you can place one or more zeros in front of
the number and select for example station 7 = 07
or 007 or 0007.
10
Channels up/down (only favorite
stations if these are shown in the
station table).
1-digit stations
Keep the button 0 – 9 pressed for
one second, the channel then
changes immediately.
or press the button 0 – 9 briefly,
the channel then changes after 2
seconds (immediately when up to
9 stations are stored).
2-digit stations
Keep the second numeric key
pressed for one second, the
channel then changes immediately.
or press both numeric keys briefly,
the channel then changes after 2
seconds (immediately when up to
99 stations are stored).
3-digit stations
Keep the third numeric key pressed
for one second, the channel then
changes immediately.
or press the three numeric keys
briefly, the channel then changes
after 2 seconds (immediately when
up to 999 stations are stored).
4-digit stations
Press the four numeric keys briefly,
the channel then changes
immediately.
03.06.2002, 16:13 Uhr
With the station table
OK
Call the station table with OK
Station table: TV
AVS
6 S–RTL
AV3
7 N–TV
AV2
8 DSF
AV1
9 TM3
0 VIDEO
10 PRO7
1 ARD
11 RTL 2
2 ZDF
12 WDR 3
3 SAT.1
13 BR 3
4 RTL
14 HR
5 VOX
15 MDR 3
0
9
...
Select program:
Change programs
Select and
proceed with OK
Favorite programs
O K
Sort alphabetically
Mark the station (the marked
station is shown in the PIP
picture
)
S
or
0
9
Mark with numeric keys
...
OK
Call the marked station
Sort alphabetically/numerically
(blue button)
Station table: TV
ARD
HOT
HR
BR-ALPHA
BR3
KIKA
CNN INT.
MDR 3
DSF
N–TV
EUROSPRT
N24
N3
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Change programs
Select and
proceed with OK
Favorite programs
O K
Sort numerically
Display favorite stations only
(yellow button)
Call Audio/Video programs – AV selection
for playing AV equipment (see
0
also page 19).
AV Selection
VIDEO AV1 AV2 AV3 AVS
Select AV socket or VIDEO for
VCR station.
i
Info
M
Menu
E
End
i
Info
M
Menu
E
End
Advertisement
Table of Contents
