Videx 6700 Series Quick Manual page 2

SERVICE BUTTON
In every
situation
Push the service button
service (if this was set up during the installation). To set
up the function of the service button, please contact
PRIVACY FUNCTION
When the
system is in
standby
Press the privacy button
function. The red LED behind the privacy symbol
will illuminate to indicate that the privacy is enabled.
CAMERA RECALL
Press the talk button
many times as the ID value of the door panel (e.g. if
When the
recalling the picture from door ID 2, press this button
system is in
twice, for door ID 3 press this button 3 times etc.). The LED
standby
behind the talk symbol
the videophone is switched ON. The display will show
the picture from the camera on the relevant outdoor
SPEECH VOLUME ADJUSTMENT
During a conversation
or in camera recall mode
Turn the roller to the right of the speech control symbol
adjustment up will increase the speech volume.
All manuals and user guides at all-guides.com
to activate the secondary
Videx Technical.
to enable the privacy
(camera recall button) as
will illuminate to indicate
station recalled.
to adjust the volume of speech. Any adjustment
down will reduce the speech volume and any
CALL TONE VOLUME ADJUSTMENT
In every
situation
Move the switch, to the right of the call tone symbol
for a low call tone level, to the centre for a medium call
The privacy function will automatically switch OFF
During an incoming call,
after the programmed time expires or by pressing the
with the privacy enabled, the
videophone will not ring and
no picture will be displayed.
During 'Camera Recall' it is possible:
To start a conversation;
To push the lock button to open the door;
To push the service button to activate the
secondary service.
Press the talk button to end the conversation.
BRIGHTNESS DISPLAY ADJUSTMENT
During a call, a
conversation or in
camera recall mode
Turn the roller to the right of the brightness control
symbol
adjustment down will reduce the brightness and any
to adjust the call tone volume level. Move down
tone level and up for a high call tone level.
privacy button again.
When the conversation
time (set up during the
installation) has ended,
the videophone stops
all communication and
the system returns to the
standby condition.
to adjust the brightness of the picture. Any
adjustment up will increase the brightness.