Table of Contents
Advertisement
Deployment Panel PC
Commissioning
3.3 Commissioning
24
CAUTION!
–
Before commissioning the device must be brought to room tempera-
ture.
–
At condensation the device must be absolutely dry before connected
to power.
–
To avoid overheat during operation the device must not be laid open
to direct sun light.
–
After opening the control cabinet or desk, there are parts with pos-
sible dangerous voltage available.
–
For all signal connections only screened cables are permitted.
–
Signal cables must not be let within the same cable shaft as high
voltage cables.
HB160 | PPC | 67S-RTP0 | en | 22-22
HMI
Advertisement
Table of Contents
