Mounting Instructions - Ecco ED3777 Series Assembly, Installation And Operation Instructions

Mounting Instructions:

Caution:
When drilling into any vehicle surface, make sure the
area is free from any electrical wires, fuel lines, vehicle upholstery,
etc. that could be damaged
1. Select a flat mounting surface with the visibility of the flash and
ease of wiring access taken into consideration.
2. Using the unit or bracket as a template, mark the two mounting
hole locations. Drill a third hole for wire access as needed.
3. Mount the directional with the supplied hardware as shown.
Surface Mount
MOUNTING
SURFACE
Permanent Mount
Adhesive Mount
MOUNTING
SURFACE
Edge Mount
Page 2 of 6