Advertisement

Quick Links

ED3777 directional LEDs are bright and versatile 180
degree warning light, work light and puddle light combina-
tions that are suited to a wide variety of applications. Their
low profile, narrow shape and multiple mounting options
(surface, edge, self-adhesive and permanent) and 30
degrees of adjustable pivoting, provide superior flexibiltiy
when positioning the lights for optimum warning capability.
Both models offer multiple flash patterns and multiple units
can be synchronized to operate either simultaneously or
alternately with each other.
Available in solid colors: ED3777X (A,B,R,G,W)
dual colors: ED3777XX (AB, AG, AR, AW, BW, RW, RB)
WARNING!
Failure to install or use this product according to manufacturer's recommendations may result in property
damage, serious injury, and/or death to those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety informa-
tion contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are
essential to ensure the safety of you and those you are seeking to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that s/he
can operate the system without losing eye contact with the roadway.
5. Do not install this product or route any wires in the deployment area of an air bag. Equipment mounted or located in an air
bag deployment area may reduce the effectiveness of the air bag or become a projectile that could cause serious personal
injury or death. Refer to the vehicle owner's manual for the air bag deployment area. It is the responsibility of the user/
operator to determine a suitable mounting location ensuring the safety of all passengers inside the vehicle particularly
avoiding areas of potential head impact.
6. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles or other obstructions.
7. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an inter-
section, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes.
8. This equipment is intended for use by authorized personnel only. The user is responsiblefor understanding and obeying
all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws and
regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
Installation and Operation Instructions
ED3777 Warning Light
Page 1 of 9

Advertisement

Table of Contents
loading

Summary of Contents for Ecco ED3777

  • Page 1 Installation and Operation Instructions ED3777 Warning Light ED3777 directional LEDs are bright and versatile 180 degree warning light, work light and puddle light combina- tions that are suited to a wide variety of applications. Their low profile, narrow shape and multiple mounting options...
  • Page 2: Specifications

    -Less than 1 sec. for next pattern ED3777RB BLUE -Between 1-3 sec. for previous pattern ED3777RW WHITE -Between 3-5 sec. for factory default pattern -More than 5 sec. default to pattern #13 (ED3777) and pattern ED3777AG AMBER GREEN #12 (ED3777XX) ED3777AB AMBER...
  • Page 3 WARNING! This unit is a safety device and it must be connected to its own seperate fused power point to assure its continued operation should any other electrical accessory fail. WARNING! When drilling into any vehicle surface, make sure the area is free from any electrical wires, fuel lines, vehicle upholstery, etc. that could be damaged.
  • Page 4 SAE J595 CA T13 SAE J845 ECE R65 PATTERN MODE FLASH PATTERNS SYNC. RED AMBER BLUE WHITE RED AMBER BLUE WHITE RED AMBER BLUE RED AMBER BLUE (140°) (140°) (140°) (100°) Triple 75FPM sim. Class Class Class 1 Class 1 N/C N/C Class 1 Class 1 Class 1 Class 1 N/C Phase1 Triple 75FPM sim.
  • Page 5 ED3777XX Series Flash Pattern Chart: SAE J595 CA T13 ECE R65 LED Color LED Color 1 & Color 1 & Color 2 & PATTERN 3 LED ED3777 FLASH PATTERN SYNCH AMBER BLUE WHITE AMBER BLUE AMBER BLUE Color 4 Color 3 Color 2 &...
  • Page 6 SAE J595 CA T13 ECE R65 LED Color 1 & LED color 1 Color 3 LED Color 2 & PAT- & Color 3 Color 2 & Color ED3777 FLASH PATTERN SYNCH AMBER BLUE WHITE AMBER BLUE AMBER BLUE TERN Color 4 Red line 4 White &...
  • Page 7 SAE J595 CA T13 ECE R65 LED Color LED Color 2 & 1 & Color 3 PAT- color 1 & ED3777 FLASH Color 4 LED Color 2 & SYNCH AMBER BLUE WHITE AMBER BLUE AMBER BLUE TERN Color 3 PATTERN...
  • Page 8: Troubleshooting

    TROUBLESHOOTING The ED3777 and ED3777XX series have been factory tested and approved. If the functions of device fail, please check the following: After connecting with the power supply, be sure that the power source end is joined in correct way. And then, make sure that there is no short-circuited power occurring.
  • Page 9: Exclusion Of Other Warranties

    Manufacturer Limited Warranty and Limitation of Liability: Manufacturer warrants that on the date of purchase, this product will conform to Manufacturer’s specifications for this product (which are available from the Manufacturer upon request). This Limited Warranty extends for Thirty-Six (36) months from the date of purchase. DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR OTHER HAZARD;...
  • Page 10 Instrucciones de Instalación y Operación ED3777 Luz de Advertencia Las luces LED direccionales ED3777 son combinaciones de: luz de advertencia brillante y versátil en 180 grados, luz de trabajo y luz de suelo que vienen equipadas para una gran variedad de aplicaciones. Su perfil bajo, forma angosta y múltiples opciones de ensamblaje (superficie,...
  • Page 11: Especificaciones

    - Entre 1-3 seg. para el patrón anterior ED3777AG ÁMBAR VERDE - Entre 3-5 seg. para el patrón predeterminado de fábrica - Más de 5 seg. pasa por defecto al patrón #13 (ED3777) y ED3777AB ÁMBAR AZUL al patrón #12 (ED3777XX) ED3777AR ÁMBAR...
  • Page 12: Detección Y Resolución De Problemas

    DETECCIÓN Y RESOLUCIÓN DE PROBLEMAS Las series ED3777 y ED3777XX han sido probadas y aprobadas en fábrica. Si las funciones o el dispositivo fallan, revise lo siguiente: Luego de conectarse al suministro de energía, asegúrese de que el extremo de la fuente de energía esté conectado de forma correcta.
  • Page 13 Instructions d'installation et d'utilisation ED3777 Éclairage d'avertissement Les DELs directionnels ED3777 sont des éclairages d’avertissement lumineux et polyvalents de 180 degrés, des combinaisons de feux de chantier et d’entrée de porte qui conviennent à une grande variété d'applications. Leur profil bas, forme réduite et plusieurs options de montage (de surface, de bord, auto-collants et permanentes) et leur plage de pivotement ajustable de 30 degrés offrent une...
  • Page 14: Montage

    AMBRE VERT - Entre 3 et 5 sec. pour configuration d’usine par défaut ED3777AB AMBRE BLEU - Plus de 5 sec. valeur par défaut au motif no.13 (ED3777) et motif no. 12 ED3777XX ED3777AR AMBRE ROUGE Page 2 sur 3...
  • Page 15: Dépannage

    DÉPANNAGE Les appareils séries ED3777 et ED3777XX ont été testés en usine et approuvés. Si les fonctions de l'appareil tombent en panne, veuillez vérifier les points suivants : Après avoir branché l’appareil, assurez-vous que la source d'alimentation est jointe correctement. Ensuite, assurez-vous qu’aucun court-circuit ne se produise.

Table of Contents