Version Display Mode - Denon RCD-N10 Service Manual

1-1. Version Display Mode

1-1.1. Actions
Version information is displayed when the device is started in this mode.
1-1.2. Starting up
Insert the AC plug while pressing button "POWER", and wait for more than 3 seconds.
Release the "POWER" button when the Power indicator turns orange and the Eject indicator turns
white.
Select the "Version Check" using the "CURSOR f / d " button, then press the "ENTER" button to con-
firm.
Startup display
1-1.3. Display Order
q System Version → w System (Bootloader) Version → e Touch Sensor Version
→ r HEOS Version → t HEOS Build → y HEOS Module → u HEOS Configuration
→ i HEOS Locale → o Restore → Q0 Ether Mac Address → Q1 WiFi Mac Address
→ Q2 BT Mac Address → Q3 Serial Number ·····
Unplug the AC plug to cancel this mode.
q System Version :
w System (Bootloader) Version
e Touch Sensor Version
r HEOS Version
t HEOS Build
y HEOS Module
u HEOS Configuration
i HEOS Locale
o Restore
Q0 Ether Mac Address
Q1 WiFi Mac Address
Q2 BT Mac Address
Q3 Serial Number
59