Switching The Display’s Brightness; Using The Sleep Timer - Denon CEOL RCD-N10 Owner's Manual

Contents Connections
Switching the display's brightness
The display brightness can be adjusted between five levels.
1
Press DIMMER.
The brightness of the display switches each time the button is
0
pressed.
0 When "Off" is set, the display turns off temporarily when operating the buttons.
0 The display brightness is set to most brightly by default.
Front/Top
Rear panel
panel
Playback Settings

Using the sleep timer

You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
o To cancel the sleep timer
1
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
75
Remote control
unit
Tips
Press SLEEP during playback and select the setting
time.
The o indicator on the display lights.
0
The sleep timer can be set to up to 90 minutes, in steps of 10
0
minutes.
After about 5 seconds, the setting is entered and the display
0
returns to as it was before.
Press SLEEP to set "Sleep 1 Off".
The o indicator on the display turns off.
Index
Appendix