Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ecler HSA300
Summary of Contents for Ecler HSA300
- Page 1 HSA300 AMPLIFIERS High Impedance Amplifier USER MANUAL 50-0412-0102 HSA300 EN...
-
Page 2: Table Of Contents
INDEX IMPORTANT REMARK......................3 IMPORTANT SAFETY INSTRUCTIONS ................4 IMPORTANT NOTE ........................5 INTRODUCTION ........................5 4.1. Main Features ..........................5 INSTALLATION.......................... 6 5.1. Placement and assembly ......................6 5.2. Mains connection ........................6 5.3. Signal input connections ......................7 5.4. -
Page 3: Important Remark
IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 5: Important Note
Technical Services. Ecler HSA300 comes with a 3-year warranty. INTRODUCTION The HSA300 is a single-channel power amplifier with a directly amplified high impedance output (100V line). 4.1. Main Features • SPM 100 Technology - N Channel direct high impedance amplification (100V line),... -
Page 6: Installation
INSTALLATION 5.1. Placement and assembly The HSA series amplifiers come in 19" rack module format, two units high. It is important that the amplifier, as a heat source, is not placed next to other equipment nor exposed to high temperatures. If the installation is done inside rack cabinets enclosed by doors, it is highly recommended to fit these with forced ascending ventilation, installing fans at the top and bottom. -
Page 7: Signal Input Connections
5.3. Signal input connections On it rear panel, the HSA300 amplifier has an analogue, balanced and line level input signal. The signal input connectors are three pin Euroblock connectors (11). The assignment of the connections is as follows: Live or direct signal >... -
Page 8: Operation And Usage
6.2. LED indicators on the front panel The HSA300 has the following LED indicators on the front panel: • SIGNAL presence indicator (4): warns of the presence of a signal at the amplifier's input. -
Page 9: Volume Control On The Front Panel
6.3. Volume control on the front panel The front panel has rotating volume control (5) for the amplifier output level. In the packaging of the device, you will find bag with a transparent cap that can be fitted to the rotating control on the front panel. Its function is to protect the volume setting from accidental changes while the installation is being used. -
Page 10: Diagrams And List Of Functions
DIAGRAMS AND LIST OF FUNCTIONS 1 THERMAL, heat protection 7 Mains socket indicator 8 Fuse holder 2 CLIP cut-off indicator 9 GND grounding terminal 3 OVERLOAD indicator 10 OUTPUT screw-type connectors 4 SIGNAL presence indicator 11 INPUT screw-type connectors 5 Volume 12 Fan 6 POWER switch and start up pilot light... -
Page 11: Configuration Diagram
CONFIGURATION DIAGRAM BLOCK DIAGRAM... -
Page 12: Technical Characteristics
TECHNICAL CHARACTERISTICS HSA300 Power Output RMS Power @ 10% THD 302 WRMS @ 100V line RMS Power @ 1% THD: 254 WRMS @ 100V line Frequency response (-1dB, -3dB) 30Hz - 35kHz Filter (High-Pass) 3rd order Butterworth 70Hz THD+Noise @ 1kHz Full Power <0.07%... - Page 13 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. For technical queries contact your supplier, distributor or complete the contact form on our website, Support / Technical requests. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...