fantastic furniture Java Manual page 9

Step 7
You will need
Phillips Head
4 x Cam
Screwdriver
Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Cam Nuts (H2) into
Left & Right Fixed Shelves (P6&P7) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Fixed Shelves (P6xP7) to Side Panels (P3x2)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 8
You will need
Phillips Head
4 x Dowels
Screwdriver
(H3)
4 x Cam Bolts
(H1)
Insert 4 x Dowels (H3) into Divider Panel (P4).
Attach 2 x Cam Bolts (H1) to Divider Panel (P4)
as shown by tightening with the Phillips Head Screwdriver.
Carefully turn the Divider Panel (P4) over and attach
the remaining 2 x Cam Bolts (H1) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Ensure the raw edge of the shelves
are at the back of the bookcase
before securing
Laminated
edge
(P6)
(H2)
(H3)
(H3)
(H2)
(P3)
(H1)
(H1)
(P4)
(H1)
(H1)
(P4)
(P7)
(H2)
(H2)
(P3)
(H3)
(H3)
Page 9