Flip-A-Chip Setting; Cleaning (Cleaning) - Panasonic WV-CS320 Operating Instructions Manual

Flip-A-Chip Setting

Move the cursor to FLIP-A-CHIP and select ON or OFF by moving the
joystick to the right or left.
The factory default setting is OFF.
OFF: Tilt range is limited from 0 ° to 92 °.
ON: The flip-a-chip function allows the tilt angle to widen up to 180 °.
Note: Flip-a-chip does not work if PAN LIMIT is set to ON.

Cleaning (CLEANING)

Built-in electric mechanical contacts are refreshed at regular intervals
(approx. 7 days) if CLEANING is set to ON.
A dry contract adversely affects picture quality and motors operation.
1. Move the cursor to CLEANING and select ON or OFF by moving
the joystick to the right or left.
The factory default setting is OFF.
ON: The contacts are cleaned for approx. 1 minute. "CLEANING"
disappears when it is over.
OFF: No contact cleaning
Note: Select OFF when the camera downloads or uploads the
preset data.
22
Setup menu
** SET UP MENU **
O
PRESET 1
O
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING OFF
IMAGE HOLD OFF
O
CAMERA
Setup menu
** SET UP MENU **
O
PRESET 1
O
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING ON
IMAGE HOLD OFF
O
CAMERA
CLEANING
CLEANING