Panasonic WV-CS320 Operating Instructions Manual page 20

5. To set pan limit ON/OFF
Move the cursor to PAN LIMIT and select ON or OFF by
moving the joystick to the right or left.
The factory default setting is OFF.
ON: Manual pan is limited from the starting point to the end-
point specified by position setting. Set ENDLESS to OFF
before PAN LIMIT is set to ON.
OFF: Manual pan is not limited.
Note: When ON is selected for PAN LIMIT, manual pan moves the
camera away from the other side (PAN LIMIT) of the start-end
range.
6. To set ENDLESS to ON/OFF
Move the cursor to ENDLESS, and select ON or OFF by moving
the joystick to the right or left.
The factory default setting is OFF.
ON: The camera pans from the starting point to the endpoint, and
keeps rotating in the same direction to return to the starting
point. Set PAN LIMIT to OFF before ENDLESS is set to ON.
OFF: The camera pans from the starting point to the endpoint,
and rotates backward to the starting point.
This movement is repeated over and over.
7. To set a dwell time
Move the cursor to DWELL TIME and select a dwell time by mov-
ing the joystick to the right or left.
The factory default setting is 2S.
Dwell time changes as follows:
Notes:
• When the panning, tilting, zooming or focusing in the AUTO
PAN mode is controlled manually, the Auto mode function
should be cancelled.
To activate the auto mode, select the AUTO PAN mode again
or set a time for SELF RETURN in the SET UP menu.
• Auto refreshing may be activated during the auto mode to
calibrate the lens position.
21
2S 3S 5S
30S 20S 10S
Endpoint
Camera
Start-end
range of
auto pan
Starting point
** AUTO PAN **
POSITION
SPEED
PAN LIMIT
ENDLESS
DWELL TIME
RET
** AUTO PAN **
POSITION
SPEED
PAN LIMIT
ENDLESS
DWELL TIME
RET
Self-end
range of
pan limit
START
END
••••|••••
L H
OFF
ON
2S
START
END
••••|••••
L H
OFF
OFF
2S