Panasonic WV-CS320 Operating Instructions Manual page 23

Light Control Setting (ALC/MANUAL)
1. Display the SET UP menu on the monitor screen by referring to
page 14.
2. Move the cursor to ALC/MANUAL and select ALC or MANUAL by
using the joystick.
The factory default setting is ALC.
When you select ALC, set backlight compensation.
Note: The backlight compensation submenu associated with this
menu is described separately and should be set up after
installing the camera at the site and observing the actual site
picture.
3. When MANUAL is selected, quit the setup menu by pressing the
MON (ESC) key. Press the OPEN or CLOSE key on the controller
for iris adjustment.
(1) ALC Mode with BLC ON
1. Press the CAM (SET) key after selecting ALC. The ALC CONT
menu appears.
2. Move the cursor to the BLC and select ON.
3. If you want to adjust the video output level, move the "I" cursor for
LEVEL. Adjust it to the desired level by using the joystick.
4. Move the cursor to RET and press the CAM (SET) key to return to
the CAM SET UP menu. To return to the camera picture, press the
F4 button.
24
Camera setting menu
** SET UP **
O
CAMERA ID ON
O
ALC/MANUAL ALC
SHUTTER OFF
AGC ON(MID)
SYNC INT
O
WHITE BAL ATW
AF MODE MANUAL
O
RET SPECIAL
Backlight compensation menu
** ALC CONT **
BACK LIGHT COMP
BLC OFF
MASK SET
LEVEL ••|•••••
- +
RET
** ALC CONT **
BACK LIGHT COMP
BLC ON
LEVEL ••|•••••
- +
RET