fantastic furniture Cove Assembly Instructions Manual page 9

Step 9
You will need
4 x Screws 2 x Medium
(H2) Bolts (H8)
2 x Hexagonal 1 x Allen
Nuts (H13) Key (H14)
2 x Washers Phillips Head
(H10) Screwdriver
Attach the 2 x Support Slats (P11) to the Centre Rail (P6)
using 2 x Medium Bolts (H8), 2 x Washers (H10) and 2 x
Hexagonal Nuts (H13), tightening with the Allen Key (H14).
Attach the 2 x Support Slats (P11) to the Left & Right Side Rails (P3 & P4) using 4 x Screws (H2),
tightening with a phillips head screwdriver. Ensure the adjusters (H12) on the Support Legs (P7)
are retracted so they are not touching the floor. With assistance, move the bed into its final
position. Once the bed is in it's final position extend the 3 x Adjusters (H12) on the 3 x
Support Legs (P7) so they are level with the floor.
Step 10
You will need
22 x Screws Phillips Head
(H2) Screwdriver
Attach the 11 x Slats (P10) to the Left and Right Side Rails (P3, P4)
using 22 x Screws (H2), tightening with a phillips head screwdriver.
fantasticfurniture.com.au
H2
(P3)
(P10)
H2
H2
(P3)
H2
H8
(P11)
H8
H10
H13
H2
H10
H13
H2
H2
(P10)
(P10)
H2
H8
H10
H13
(P4)
H2
(P11)
(P6)
Two People
Required
(P4)
H2
Page 9
H14