Installing/
Replacing MSAM
Cards
CAUTION
To Install/Replace
MSAMs
9
Tear the paper off against the serrated plastic strip in the printer.
When you first receive your V
MSAM cards or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
1
Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
2
Remove the battery.
Figure 11
Removing the Smart Battery
3
After removing the battery, the MSAM compartments are exposed.
4
Remove any previously installed MSAM card by sliding the card from the
MSAM cardholder.
x
670 terminal, you may need to install one or more
T
S
ERMINAL
Installing/Replacing MSAM Cards
V
670 I
G
X
NSTALLATION
UIDE
ETUP
23