Table of Contents
Advertisement
11.1 What to do if...
Problem
The oven does not heat
up.
The oven does not heat
up.
The oven does not oper‐
ate.
The lamp does not oper‐
ate.
Steam and condensation
settle on the food and in
the cavity of the oven.
The flame extinguishes im‐
mediately after ignition.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Possible cause
The oven is deactivated.
The fuse is blown.
The automatic ignition
does not work.
The lamp is defective.
You left the dish in the
oven for too long.
Thermocouple is not heat‐
ed up sufficiently.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
ENGLISH
Remedy
Activate the oven.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Ignite the burner manually
with a long match. Hold the
flame near the hole in the
bottom of the oven cavity.
At the same time push the
knob for the gas control
and turn it counterclock‐
wise to the maximum tem‐
perature. When the flame
comes on, keep the knob
for the gas control pushed
for 15 seconds or less to
let the thermocouple warm
up. If not, the gas flow is
interrupted.
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
After lightning the flame,
keep the knob for the gas
control pushed for 15 sec‐
onds or less.
19
Advertisement
Table of Contents
