TABLE OF CONTENTS TABLE OF CONTENTS ....................................... 2 IMPORTANT SAFEGUARD ......................................3 COLOR TV FEATURES....................................... 4 DESCRIPTION AND PREPARATION..................................5 OPERATION OF REMOTE CONTROL..................................7 MENU OVERVIEW........................................10 TV OPERATION......................................... 11 ADVANCED FUNCTIONS ......................................18 TROUBLESHOOTING ....................................... 22 SPECIFICATIONS........................................24...
IMPORTANT SAFEGUARD WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION · To reduce the risk of electric shock, do not attempt to open the cabinet. There are no parts inside you can service yourself. Refer all servicing to qualified personnel.
COLOR TV FEATURES Color systems - PAL, SECAM, NTSC3.58 &NTSC4.43 Sound systems - DK, BG Preset Programs - 100 Preset Method - Auto Search, Manual Store, Fine Tune Tuning Method - Voltage Synthesized Frequency Range - Hyper Band Tuner Voltage Range - 180-240V, ~50Hz Display - ENGLISH, RUSSIAN...
1. DESCRIPTION AND PREPARATION 1.1 INSTALLATION OF ANTENNA Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above. NOTE: · For better reception, especially in outlying area or where ghost or interference happens, an external roof-mounted antenna is recommended. ·...
Page 6
1.3 FRONT PANEL 1. POWER BUTTON To turn ON/OFF the TV set. 2. REMOTE SENSOR To receive the infra-red signals from remote handset. 3. PROGRAM( ) BUTTONS Select program number cyclically. To turn on the TV when it is in standby mode. To select item in sub-menu. 4.
1.4 REAR TERMINAL & SIDE AV 1. 75 OHMANTENNA INPUT 2. SCART AV INPUT/OUTPUT 3. AUDIO/VIDEO IN 2 (SIDE AV INPUT) 2 OPERATION OF REMOTE CONTROL 2.1 DESCRIPTION OF REMOTE CONTROL KEYS INTRODUCTION OF KEY FUNCTION This TV features with a full-function remote control handset. For a more compact remote unit design, some of the keys are multiple with more than one function.
Page 8
4 CAPS BUTTON * To select the input form before data or information writing between capital and small letter. 5 SLEEP BUTTON Set the sleep timer from 120 to 10 minutes by pressing the SLEEP button repeatedly. To display the remaining time, press SLEEP button once.
Page 9
17 RECALL BUTTON Press to return to the previously viewed channel. 18 OK BUTTON Within the on-screen menu, press to enter some special function such as game, notebook, calendar and etc. 19 SOUND SYSTEM BUTTON To directly select sound system without going into the submenu. 2.2 INSTALLATION OF BATTERIES 1.
3. MENU OVERVIEW MAIN MENU SUB-MENU SUB-MENU ENTRY CONT BRIGHT COLOR PICTURE TINT ± 00 SHARP PIC.M DYNAMIC/PERSONAL/MILD/STANDARD ON/OFF COLOR AUTO/443PAL/SECAM/443NTSC/358NTSC SOUND BG/DK LANGUAGE ENGLISH / RUSSIAN SETTING PRESENT STORE TO SURE ?/OK CH ADJUST FEATURE FAV.CH FAV. CH1 FAV. CH2 CALENDAR FAV.
MAIN MENU SUB-MENU SUB-MENU ENTRY CLOCK 0:13 OFF TIMER OFF/ONCE/DAILY 0:00 TIMER ON TIMER OFF/ONCE/DAILY 0:00 POSITION POSITION BAND VHFL/VHFH/UHF PRESET MANUAL UP/DOWN SKIP ON/OFF FINE UP/DOWN AUTO MEMORY 4. TV OPERATION 4.1 BASIC OPERATION 4.1.1 POWER ON · Press POWER button on the main unit to turn on/off the TV set. ·...
Page 12
· Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for selecting other pull-down menus in the main menu bar. 4.1.4 SELECT MENU ENTRIES · After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries (e.g.
Page 13
· The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 4.2.2 MANUAL SEARCH To preset the TV channel to your desired position number, manual searching should be used. ·...
Page 14
· Press the OK button to display CH ADJUST menu entries as shown. · Press the PROGRAM UP/ DOWN button to select PRESENT, then press the VOLUME UP/DOWN button to select the program number you want to change, e.g. 30. ·...
Page 15
4.3 RECEIVING SYSTEM SELECTION This unit is a multi-system TV. System selection function allows you to select suitable receiving system for the specific broadcasting system in your area. This unit has the capability of auto-identification on color system. Normally, we strongly recommend you to select the auto-identification mode. 4.3.1 SYSTEM SETTING EXAMPLE: color system selection ·...
Page 16
4.4 OPERATION OF WATCHING TELEVISION 4.4.1 SELECTING CHANNELS · Press PROGRAM UP/DOWN button to change the channel ascendingly / descendingly; · Use the digit keys on the remote control directly to select the channel. 4.4.2 PICTURE ADJUSTMENT Adjust the level of CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, and TINT* to get the most favorable picture ·...
Page 17
· Press the VOLUME UP/DOWN button to select among OFF, ONCE, DAILY. · If you select DAILY or ONCE, press PROGRAM DOWN button to 0:00, then press the VOLUME UP/DOWN button to set the ON time, e.g. 22:59. · Press PROGRAM DOWN button to select POSITION, then Press VOLUME UP/DOWN button to select your desired channel No., e.g.
4.7 PICTURE MODE SELECTION There are four choices for picture modes. Picture mode can be set by user according to his personal preference. SHORT-CUT OPERATION Press the PICTURE button on the remote control, the current picture mode will display on the screen, for example, the STANDARD picture mode.
Page 19
· After having pushing all the box into , and all the boxes change into apples as shown, you win the game for this level, it will enter next higher level automatically. If you finish the game of level 20, it will return to level 1 again. NOTES: ·...
Page 20
1. Press the CAPS button on the remote control to turn the capital function off, the color of CAPS on the screen will turn into blue; 2. Press" 2" key twice to input the letter" a"; pressing" 2"key repeatedly can cyclically input" 2, a, b" and" c". The same procedure is applicable to other digit or small letters input.
Page 21
5.4 BIOLOGICAL CLOCK This function can make you know about the low tide, high tide and critical stage of you intellect, emotion and force at a certain day so as to live harmony with the rhythms of environment. · Activate FEATURE menu. ·...
6. TROUBLESHOOTING 6.1 PROBLEMS OF PICTURE The most common types of picture problems are as follows: IGNITION Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or other electrical appliances. GHOSTS Ghosts are caused by the television signal following two paths.
Page 23
6.2 PROBLEMS IN OPERATION If this unit does not seem to operate properly, check the POSSIBLE CAUSES below. SYMPTOM POSSIBLE CAUSES NO POWER The power cord is not connected. The POWER BUTTON on the main unit is off. NO TV RECEPTION The antenna connector is not connected, or wires are broken.
7. SPECIFICATIONS MAIN UNIT TV Receiving System PALSECAM, BG, DK AV Color System PAL, SECAM, NTSC 3.58 & 4.43 Tuner HYPER BAND TUNER Number of Preset Program 100 (0-99) Channel Indicator On screen display Function Adjust Indicator MENU display Language of OSD English, Russian RF Aerial Input 75-ohm unbalanced...
Need help?
Do you have a question about the H-TV2103PF and is the answer not in the manual?
Questions and answers