Operation - Schaudt CSV 416 Operating Instructions Manual

8050111 BA / EN
Operating Instructions Caravan-charging system CSV 416
Never try to start the device using a defective mains cable or a faulty
F
connection.
Never undertake maintenance on the device when it is live.
F
DANGER!
Y
Incorrect installation
Electric shock or damage to connected devices:
Install as shown in installation instructions.
F
The mains connection line may only be replaced by an authorised
F
customer service department or by those qualified.
WARNING!
Y
Hot components
Burns:
Blown fuses may only be changed after the power to the system has
F
been disconnected
Blown fuses may only be replaced once the cause of the fault is
F
known and has been rectified
Never bypass or repair fuses
F
The back of the device can get hot during operation. Do not touch
F
them.
Only use original fuses rated as specified on the device
F
Never store heat sensitive objects close to the device (e.g. tempera-
F
ture sensitive clothes if the device has been installed in a wardrobe)
3

Operation

This device is not intended to be used by those (including children) with
Y
limited physical, sensory or mental aptitude or lack of experience and/or
knowledge unless they are supervised by a person responsible for their
safety or have received instruction from this person as to how the device
is used.
Children must be supervised to ensure they do not play with the device.
This device is intended for installation into a vehicle.
The caravan charging system is operated solely from the control and
Y
switch panel connected.
The CSV 416A caravan charging system does not require daily operation.
Initial setting is only needed after the type of battery (lead-acid / lead-gel) is
changed, or for initial use or when upgrading with accessories (see section
3.3 and the CSV 416A installation instructions for details).
Date: 30.05.2021
3