Application And Function - Schaudt CSV 416 Operating Instructions Manual

Other Control and
bus nodes operator panel
(bus--compatible)
Solar regulator
LR ...
(accessory)
Modules
8050111 BA / EN
Operating Instructions Caravan-charging system CSV 416
4

Application and function

Caravan charging system
CSV 416 A
Bus
12V consumers
Fig. 2 On-board power supply system
The CSV 416 caravan charging system is the central power supply unit for
all 12 V consumers connected to the caravan's electrical system. It is usually
located in a cupboard or storage area and is accessible from the front in
order to change fuses.
The caravan charging system has been designed solely for connecting to a
12 V onboard supply.
Connected units can be supplied from the caravan battery or the towing
vehicle's battery if a mains supply is not available.
Because the device provides a hum-free, stabilised output voltage, sensitive
consumers such as transistor lights and radios can be connected and powe-
red.
The CSV 416A caravan charging system comprises:
a charge module for charging all batteries connected
F
a main switch relay to switch certain consumers on and off
F
the complete 12V distribution system
F
fuses for the 12V circuits
F
a battery booster
F
LIN bus interface
F
Tank analysis
F
Date: 30.05.2021
Lighting
Pump
Heater
+ --
etc.
Caravan battery
Sensors
Water Waste water
tank tank
230V AC
+ --
Starter battery
Towing vehicle
7