Table of Contents
Advertisement
TOUCH SCREEN REMOTE CONTROL OPERATION—SCR MODELS
n Using the Mounting Base
The transmitter comes with a mounting base which allows
you to hang the transmitter on the wall.
1. Secure the mounting base on the wall with supplied
screws. For best viewing angle, make it the same
height as your eyes.
2. Hang the transmitter on the hook of the mounting
base, then push down so the transmitter is flush to the
mounting base.
Symptom
Battery icon on LCD on transmitter
LCD display is blank
LCD display shows "funny" display
Appliance does not come on
Monessen • NB18/24 Gas Log Set Installation/Owner's Manual • 81D0107 • Rev B • 09/16
40
Figure 64
TROUBLESHOOTING
Causes
Low Battery
Low Battery
Low Battery
The transmitter did not match with the
receiver.
Transmitter measures temperature
exceeding 99°F and shows "HI" on LCD.
Distance between the transmitter and
receiver is more than 30 feet.
NB18/NB24 Gas Log Set
FP2674
mounting base
Action
Replace batteries. Change batter-
ies every 6 months.
Check battery installation or replace
batteries.
Reset the transmitter (see "Reset-
ting the Transmitter" setting)
Make sure the transmitter has
learned to the receiver.
Move transmitter to a cooler place
and wait until temperature drops
below 99°F.
Make sure the opening distance is
less than 30 feet.
Advertisement
Table of Contents
