Table of Contents
Advertisement
NB18/NB24 Gas Log Set
INSTALL 18", 24" AND 30" (F,R) HIGHLAND
OAK LOGS ON NATURAL BLAZE BURNER
1. Place the #1 log (the "chunk") on the grate bar right side
of the burner adjacent to the controls. Figure 20
Figure 20
2. Place front right log (#2) on right pin located on burner
and right grate bar. Figure 21. After placing front right
log, ensure log is fully upright and tilting towards the
LG620
back of the burner.
place log 1
Right Front Log #2
Figure 21
LG621
3. Place right rear log (#3) on pin located on rear support
place log 2
bracket and rest left side of log on front right log. Figure
22. After placing right rear log, ensure log is fully upright
and does not tilt forward. Slide #1 log ember chunk back
to contact right rear log.
Right Rear Log #3
Figure 22
Monessen • NB18/24 Gas Log Set Installation/Owner's Manual • 81D0107 • Rev B • 09/16
LG622
place log 3
Ember Chunk
Log #1
GRATE AND LOG INSTALLATION
4. Place left rear log (#4) on pin located on rear support
bracket on left side and left grate bar. Figure 23
Left Rear Log #4
Figure 23
LG623
5. Place left front log (#5) on left pin located on burner and
place log 4
left grate bar. Rest top right portion of log on right front
log. Figure 24
Left Front Log #5
Figure 24
LG624
place log 5
19
Advertisement
Table of Contents
