BEACHCOMBER AND RIVERWOOD LOGS
INSTALL 18" BEACHCOMBER AND RIVERWOOD
LOGS ON NATURAL BLAZE BURNER
1. Place the rear log (#1) on the rear pins located on the
log support bar. (See Figure 43.)
Figure 43.
2. Place the front left log (#2) on the pin located on the
left side of the burner. (See Figure 44.)
2
Figure 44
3. Place the front center log (#3) on the pin located on
the right side of the burner. (See Figure 45.)
2
Figure 45
Monessen • NB18/24 Gas Log Set Installation/Owner's Manual • 81D0107 • Rev B • 09/16
24
1
1
1
3
4. Place the right log (#4) on the bar located on the right
side of the burner. (See Figure 46.)
2
Figure 46
5. Place the top left log (#5) on the left side of the burner
allowing the log to rest on top of the front left log (#2).
(See Figure 47.)
5
2
Figure 47
6. Place the top center log (#6) to the right of the pilot
orifice allowing the log to rest on top of the front right
log (#3) and the front left log (#2). (See Figure 48.)
5
2
6
Figure 48
NB18/NB24 Gas Log Set
1
4
3
1
4
3
1
4
3