Vantrue OnDash N1 Pro User Manual page 8

3.2 Installing a Memory Card (Recommend Vantrue microSD
card.)
Please use a genuine microSD memory card from 16GB to
256GB with a speed rating of class 10 or higher. We
recommend using Vantrue microSD Card (need to buy
separately). Please insert the SD card when dash cam is off.
Carefully insert the memory card into the camera's card
slot until it clicks. To remove the card, power off the
camera first, then push the card into the slot until it clicks
again.
NOTE: When using a 64GB, 128GB or 256GB MicroSD card, please
format it to FAT32 on the camera first.
Please insert the card into the camera. If it says 'please insert TF
card' or 'error card please format' here, please press the recording
button(OK button) and thenpress the power button to access into
the menu, go 'system setup' and choose 'Format SD Card'. Then select
the " OK " and wait for 10 seconds. Then the card will be formatted
successfully.
(If you format it on computer, please search online on "How to
formata 64GB microSD card to FAT32".）
REMINDER:
- 7 -