Vantrue OnDash N1 Pro User Manual page 18

4.8 Parking mode
To use the parking mode, go to "Record Setup">"Parking Monitor"
and select ON. Parking mode icon will appear at the left side of
the screen.
4.8.1 Triggered by Motion Detection When Charging
After activating the Parking Monitor, the camera will auto switch to
parking mode once it detects no movement in front of the camera
for 5 minutes while recording. Parking mode icon will turn into orange.
When the dash camera switch into parking mode with power supply,
once it detects movement at the front, it will start auto-recording;
it will stop recording after 10 seconds of inactivity.
To manually activate Parking Mode, long press the Emergency/P button
until the P icon turns into orange.
- 17 -