Rigging Check - L-Acoustics CLAMP250 Owner's Manual

Rigging check

About this task
Procedure
1. Loosen and tighten the (top) locking knob.
• The knob can be tightened and loosened by hand.
• The clamp opens up when the knob is loosened.
• The clamp closes when the knob is tightened.
2. Loosen and tighten the (bottom) azimuth knob.
• The knob can be tightened and loosened by hand.
• The top part can be rotated when the knob is loosened.
• The rotation is blocked when the knob is tightened.
3. Remove and insert the safety pin.
unlocked position
• The safety pin is not missing or damaged.
• The pin can be removed and inserted by hand.
• The pin cannot be removed when it is in locked position.
What to do next
If a problem is detected, contact your L-Acoustics representative.
CLAMP250 owner's manual (EN) version 1.0
locking knob
safety pin
locked position
Inspection and preventive maintenance
azimuth knob
13