Advertisement
Quick Links
Malibu - 5+2 Drawer Chest
Assembly Instructions -
Dimensions
Width - 75cm
Depth - 40cm
Height - 109cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
630/3165
630/3206
630/3172
630/3189
630/3213
630/3196
630/3237
709/0226
709/0154
719/3460
719/3453
143/9261
159/7093
144/3288
152/6095
157/8665
152/5759
MADE IN
BRITAIN
Issue 5 - 10/10/13
Advertisement
Related Manuals for Argos Malibu 630/3165
Summary of Contents for Argos Malibu 630/3165
- Page 1 Malibu - 5+2 Drawer Chest Assembly Instructions - 630/3165 Please keep for future reference 630/3206 630/3172 630/3189 630/3213 630/3196 630/3237 709/0226 709/0154 719/3460 719/3453 143/9261 159/7093 144/3288 152/6095 157/8665 152/5759 Dimensions Width - 75cm Depth - 40cm MADE IN Height - 109cm BRITAIN Important - Please read these instructions fully before starting assembly...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 31kgs. Please lift space to layout the parts before recommend the with care. - Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below (D0116A) (747 x 396mm) Small Left Small Right Drawer Front Drawer Front (D0122A) (353 x 157mm) (D0123A) (353 x 157mm)
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Identification hole Prepare small drawer fronts and wraps x 2 Note: The small right drawer front has a small identification hole.
- Page 6 Assembly Instructions Step 3 Push drawer stops into small drawer wraps x 2 Carefully break off the 2 drawer stops (F599) from each pair of the drawer runners Push the drawer stops fully through the small drawer wraps from the inside. F599 F599 F599...
- Page 7 Assembly Instructions Step 5 Prepare large drawer fronts and wraps x 5 Screw 2 x metal dowels into the holes on the back of the large drawer fronts Note: Tighten metal dowels up fully against the panels. Insert 2 small locking nuts into the holes shown on the large...
- Page 8 Assembly Instructions Step 7 Push drawer stops into large drawer wraps x 5 Carefully break off the 2 drawer stops (F599) from each pair of the drawer runners Push the drawer stops fully through the large drawer wraps from the inside. F599 F599 F599...
- Page 9 Assembly Instructions Step 9 Prepare left and right side F600 10mm Separate runners Push fit 6 x left runners marked ‘L’ into the holes shown on left side Note: Runners must be Finished be fitted flat against the front edge panel.
- Page 10 Assembly Instructions Step 10 Prepare rail, plinth and back rails Tap 4 x wooden dowels into the ends of the rail Finished front edge Tap 2 x wooden dowels into the ends of the plinth Tap 2 x wooden dowels into the ends of the 2 back rails Note: The colour of the...
- Page 11 Assembly Instructions Step 12 Fit plinth to the right side Attach plinth to the right side using the dowel already fitted and secure with screw plain chipboard surface This outer face should be the same colour as the main unit panels Step 13 Fit back rail to the right side x 2...
- Page 12 Assembly Instructions Step 14 Finish left side Push the left side onto the dowels fitted to the plinth, rail and back rails. Secure the left side with 3 x screw Step 15 Prepare top panel Fit bracket to the underside of the top using screw so it is flush with the back edge...
- Page 13 Assembly Instructions Step 16 Prepare both surfaces of the divider F600 Finished Note: The 2 holes for the front edge large locking nuts may be drilled in either surface of the drawer divider The colour of the divider may differ from the main unit colour or may be plain chipboard.
- Page 14 Assembly Instructions Step 18 Attach top Push the top onto the side panels. Use a screwdriver to tighten the large locking nut fitted to each side. Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
- Page 15 Assembly Instructions Step 20 Secure unit to a wall To prevent possible overbalancing we recommend that this unit is secured to a suitable wall by use of the metal bracket fitted to the of the unit. Fixings are not supplied as they will need to suit the wall type, and the length of screw will...
- Page 16 Lift with care. Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW ALR2440...
Need help?
Do you have a question about the Malibu 630/3165 and is the answer not in the manual?
Questions and answers