Table of Contents
Advertisement
GS4000 Installation Guide Revision 4.00
5.4.2 GS4000-160E1
You can add or replace a power supply without powering off the device.
WARNING: THE ADDITIONAL INSTALLATION OR THE REPLACEMENT OF A POWER
*
(1) Detachment of a Power Supply
Comply with the following procedure when removing a Power Supply .
Step 1
Set the switch of the power supply targeted for replacement to OFF.
Figure 5.4-7
5-16
SUPPLY SHOULD BE DONE BY A TRAINED ENGINEER OR A QUALIFIED
MAINTENANCE PERSON.
NOTE: When installing another power supply, remove the dummy blank panel.
Store the removed dummy panel safely, so that it doesn't get bent or lost.
Switch of the Power Supply Set To OFF
Power Switch
(Set to OFF)
520-10-026-30X
Advertisement
Table of Contents
