Table of Contents
Advertisement
3.3
THE SETUP TERMINAL AND CABLE CONNECTIONS
3.3.1 Setup Terminal
(1) Specifications for Setup Terminals and Operation Terminals (for connection to the CONSOLE
port of the GS4000)
When connecting setup terminals or operation terminals to the CONSOLE ports of the GS4000,
prepare a personal computer or a workstation that supports the following features mentioned
in Table 3.3-1 below.
Table 3.3-1
Category
Communication port
Communication software
Communication
Transfer protocol
Settings
Parameter
Speed in bps (Note)
Note: Set to default of 9600 bps as shipped from factory.
(2) Specifications of Operation Terminals (for connection to the CONSOLE (10BASE-T/100BASE-
TX) port of GS4000)
When connecting operation terminals to the CONSOLE (10BASE-T/100BASE-TX) ports of
GS4000, prepare a personal computer or a workstation that supports the following features
mentioned in Table 3.3-2 below.
Table 3.3-2
Category
Communication port
Communication software
Transfer protocol
Other functions
Note 1: The Windows95, Windows98, Windows2000, Windows NT, and Windows XP have the functions of telnet client
and ftp client as the standard specification.
Note 2: Used for forwarding software/dump files.
Note 3: Used for reinstalling software.
520-10-026-30X
Specifications Required for Setup Terminals/Operation Terminals
Specification
RS-232C
1. Hyperterminal utility in Windows 95/98, Windows 2000, Windows NT or
Windows XP
2. Tera Term Pro (Version 2.3)
ZMODEM
8-bits data, 1 stop bit, no parity
19200 bit/s, 9600 bit/s, 4800 bit/s, 2400 bit/s, 1200 bit/s
Specifications Required for Operation Terminals (for connection to the
CONSOLE (10BASE-T/100BASE-TX) ports of GS4000)
Specification
Ethernet (10BASE-T/100BASE-TX) port
Tera Term Pro (Version 2.3) or other telnet client (Note 1)
ftp client (Note 1) (Note 2)
telnet, ftp
CD-ROM drive (Note 3)
GS4000 Installation Guide Revision 4.00
3-19
Advertisement
Table of Contents
