Connecting Interface Cables To The Gs4000 - Hitachi GS4000 Series Installation Manual

GS4000 Installation Guide Revision 4.00
4.11

CONNECTING INTERFACE CABLES TO THE GS4000

(1) Connection of 1000BASE-SX/1000BASE-LX/OC-48c POS Optical Fiber Cable (LC Twin-Core
Connector)
Insert the connector into the SFP until it clicks.
Figure 4.11-1 Connection of 1000BASE-SX/1000BASE-LX/OC-48c POS Optical Fiber
*
(2) Connection of 1000BASE-SX/1000BASE-LX/1000BASE-LH Optical Fiber Cable (SC Twin-Core
Connector)
Insert the connector into the GBIC until it clicks.
SC Twin-Core Connector
Figure 4.11-2 Connection of 1000BASE-SX/1000BASE-LX/1000BASE-LH Optical Fiber
*
4-40
LC Twin-Core
Connector
Cable
(LC Twin-Core Connector)
NOTE: When removing the connector, do it holding down its tabs.
GBIC
Cable (SC Twin-Core Connector)
NOTE: When removing the connector, just pull it out naturally.
SFP
520-10-026-30X