Attachment/Detachment Of A Memory Card - Hitachi GS4000 Series Installation Manual

GS4000 Installation Guide Revision 4.00
4.6

ATTACHMENT/DETACHMENT OF A MEMORY CARD

It is recommended that you insert the memory card into both the memory card slot 0 and the
memory card slot 1 (for a backup) of the Basic Control Unit (BCU).
If you have a redundant system of BCU, you should install the memory cards into both Basic
Control Unit 0 (BCU0) and Basic Control Unit 1 (BCU1).
Attachment of a Memory Card
Insert the memory card into the memory card slot of BCU.
Step 1
Memory Card
Figure 4.6-1
*
The lever of the memory card slot pops out towards you.
Step 2
Lever
Memory Card
Figure 4.6-2
4-30
Basic Control
Unit
Memory Card Slot
Memory Card Being Inserted Into the Memory Card Slot of a BCU
NOTE: When inserting a memory card, the surface labeled with the part number "HN-
F9244-66X" should be face up.
BCU After Insertion of the Memory Card
520-10-026-30X