Brake Adjustment; Suspension Adjustment; Lights Operation - MBM HYPERION 29 User Manual

6.2.5 Brakes regulations
Before using the pedal assisted bicycle, adjust the position of the
brake levers on the handlebars to obtain a comfortable and firm
grip of the lever and grip during braking. Loosen the screw (Ref. S
- Figure 11) and rotate the brake lever to the desired position. Make
sure you have tightened the screw correctly before using the pedal
assisted bicycle.
6.2.6 Suspensions reguations
Depending on the path and the load on the vehicle, it is possible to
vary the stiffness of the fork by means of a special lever placed on
the left side of the fork (Ref. Q - Figure 10.1).
The blue lever positioned at the top right (Ref. P - Figure 10.1), on the
other hand, allows the compression to be blocked, effectively trans-
forming the suspension from amortized to rigid. Furthermore, it is
possible to adjust the return speed of the suspension itself by turn-
ing the red knob positioned in the lower right part of the fork (Ref. R
- Figure 10.2). For the shock absorber, using the lever (Ref. K
- Figure 10.3) it is possible to adjust the compression speed, while
the red one adjusts the rebound extension speed of the shock ab-
sorber (Ref. X - Figure 10.3).
REGULATIONS
It is strictly forbidden to adjust the bicycle devices unless you
are an expert and trained person to do so. Incorrect adjust-
ment can cause serious injuries. Therefore, if you are unable
DANGER to adjust these functions, contact specialized personnel.
The manufacturer is not liable for accidents deriving from incorrect
adjustment of the pedal assisted bicycle devices.
FIG. 11
FIG. 10.1 FIG. 10.2
FIG. 10.3