Activation Of Assistance; Setting The Assistance Level - MBM HYPERION 29 User Manual

3.5.3. Assistance activation
The thruster is activated, and is immediately deactivated if pedaling stops. The power of the motor depends on the force
impressed on the pedals, according to a multiplication factor depending on the level of assistance selected.
3.5.4 Assistance level setting
From any screen in the Home section it is possible to change the assistance level by pressing the "UP" key (Ref. F - Figure
5) to increase it and the "DOWN" key (Ref. G - Figure 5) to decrease it.
Multiplication factor for each level of assistance:
LEVEL 0 - MULTIPLICATIVE FACTOR 0% (ENGINE NOT ACTIVE)
LEVEL 1 - MULTIPLIED FACTOR 50%
LEVEL 2 - MULTIPLIED FACTOR 100%
LEVEL 3 - MULTIPLIED FACTOR 200%
LEVEL 4 - MULTIPLICATION FACTOR 300%
LEVEL 5 - MULTIPLICATION FACTOR 400%
ATTENTION:
The engine has 5 levels of assistance which increase the
power delivered by the engine. If you set it to 0, the motor
is switched off.
ATTENTION
FIG. 5