Table of Contents
Advertisement
3.9 Error visualization
In the event of an anomaly, the system signals the problem to the user by displaying a danger icon, together with a
4-character code that allows you to trace the type of problem.
NOTE: Depending on the type of fault, in order to ensure safety, the system may prevent the engine from starting, or op-
erate in a reduced power safety mode.
3.10 Problem solving
PROBLEM
SYSTEM DO NOT WORK
ASSISTANCE DO NOT GO
ERROR ON DISPLAY
DISPLAY IS NOT CLEAR
CAUSE/SOLUTION
CHECK IF THE BATTERY IS FULL
CHECK IF THE LEVEL IS UP TO 0 AND IF THE BATTERY IS SUFFICIENT
THE SYSTEM DETECTED AN ANOMALY. DEPENDING ON THE TYPE OF FAULT THE MOTOR MAY BE DEACTIVAT-
ED OR OPERATE AT REDUCED POWER. FOR MORE DETAILS, REFER TO CHAPTER 3.10.
FOLLOWING REPENTINE CHANGES IN THE ENVIRONMENTAL CONDITIONS, THE FORMATION OF CONDEN-
SATION INSIDE THE GLASS IS POSSIBLE. CONDENSATION WILL DISAPPEAR AFTER THE TEMPERATURE
STABILIZATION.
Advertisement
Table of Contents
Troubleshooting
