Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MBM HYPERION PLUS
Summary of Contents for MBM HYPERION PLUS
- Page 1 H Y P E R I O N P L U S U S E R M A N U A L H Y P E R I O N P L U S 2 9 "...
-
Page 2: Table Of Contents
I N D E X 1. FOREWARD 3.9 Menù 1.1 Generalità 3.9.1 Brightness screen 1.2 Assistance 3.9.2 Language change 1.3 Graphical form of safety events 3.9.3 Unit Of measure 3.9.4 Weight 2. SECURITY WARNINGS 3.9.5 Gender 2.1 Liability 3.10 Errors code 2.2 Warnings For The users 3.10.1 Resolution of the problems 2.3 Warnings For the maintenance... - Page 3 6.2.4 Position of the frame, handlebar and saddle 6.2.5 Brakes adjustement 6.2.6 Suspensions adjustement 7. USE OF THE BICYCLE 7.1 Use of the bicycle 7.2 Braking 7.3 Parking 8. MAINTENANCE 8.1 Generalities 8.2 Maintenance and daily checks 8.2.1 Check of tags And pictograms 8.2.2 Check of the wheels 8.2.3 Check of the brakes 8.3 Maintenance and weekly checks...
-
Page 4: Foreward
1. FOREWARD 1.1 Generalities This manual is an integral and essential part of the pedal assisted bicycle models HYPERION PLUS 29". Before commissioning, users must read, understand and scrupulously follow the instructions below. The manufacturer is not liable for damage caused to persons and/or things or to pedal assisted bicycles if they are used incorrectly with respect to the instructions indicated. -
Page 5: Security Warnings
2. SECURITY WARNINGS USE OF THE PEDAL ASSISTED BICYCLE Each user must first read the instruction manual, especially the chapter on safety instructions. ATTENTION POSSIBILY RISKS • Despite the application of the safety devices, for safe use of the pedal assisted bicycle you must take note of all the prescriptions relating to the prevention of accidents contained in this manual. -
Page 6: Warnings For The Users
NOT AUTHORIZED MODIFICATIONS If you hear unusual noises, or feel something strange, stop the pedal assisted bicycle immediately. Then carry out a check and, if necessary, contact your authorized dealer. ATTENTION For any data that is not understood or cannot be deduced from this manual, it is recommended to consult the authorized dealer directly. -
Page 7: Other Provisions
2.4 Other provisions The first thing to do when starting use is to check the presence and integrity of the protections and the functioning of the safety devices. If you find any defects, do not use the pedal assisted bicycle! SHELTERS It is therefore strictly forbidden to modify or remove the guards, controls, labels and indication plates. -
Page 8: Pedals Assembly
2.5.2 Pedals assembly Right Pedal: identified by the letter R marked on its pin. To assemble the pedal, screw it in by turning the pin clockwise. (Figure 2) Left Pedal: identified by the letter L marked on its pin. To assemble the pedal, screw it in by turning the pin counterclockwise. -
Page 9: Description Of The Bicycle
3. DESCRIPTION OF THE BICYLCE 3.1 General description The pedal assisted bicycle is designed and built to be used outdoors, on roads and in private or public environments. In particular, the components and the type of pedal assisted bicycle allow you to tackle routes with asphalted surfaces and dirt roads without particular roughness. -
Page 10: Data Sheet
3.2 Data sheet CODE E2300PL FRAME HYDROFORMED ALUMINUM FORK CUSHIONED WITH ADJUSTMENT CRANKSET SHIFTER DEORE SHIFTER CHANGE 11 SPEEDS BRAKES PROMAX 930 HYDRAULIC 4 PISTONS DISKS PROMAX 203 F/180 R TYRES 29*2.60 SADDLE SAN MARCO SHORTFIT RIGHT AND LEFT IN STEEL PEDALS AND POLYMER MATERIAL MOTOR... -
Page 11: Levers Of The Brakes
3.3 Levers of the brakes The brake levers (Ref. C - Figure 3) are located on the handlebar of the pedal assisted bicycle, near the grips (Ref. D - Figure 3). These systems make it possible to control the brake disc calipers, located near the wheel hubs. The right lever controls the rear brake, the left one the front brake;... -
Page 12: Management System Of Assistance
3.5 Management system of the assistance 3.5.1 Management assistance commands The pedal assisted bicycle has, in the center of the handlebar, a display which allows you to manage the operation of the electric motor, as well as other basic functions illustrated below. (Figure 4) Near the left handlebar grip there are 3 buttons, which can be used with a short or long pressure, thanks to which it is possible to control the functions of the display. -
Page 13: Assistance Activation
3.5.3. Assistance activation The thruster activates and deactivates immediately if pedaling stops. The engine power depends on the force exerted on the pedals, according to a multiplier factor depending on the level of assistance selected. 3.5.4 Setting levels of assistance The assistance level can be changed from any screen in the Home section by pressing the "UP"... -
Page 14: Graphic Interface Of The Display
3.6 Graphic interface of display After switching on, the first Distance screen of the Home section is displayed. The Home section consists of 6 screens. To scroll through the screens it is necessary to press the "POWER" key. From any screen in the Home section, you can: ›... -
Page 15: Computer Mode
3.7 Computer mode The on-board computer is able to adapt to various usage scenarios, from commuting to sports use. To move between the available display modes, briefly press the "POWER" key (Ref. H - Figure 5). 3.7.1. "RACE" Mode I It is the fifth screen of the Home section. In this screen the values in watts (w) of the engine power and cyclist power are expressed in full. -
Page 16: Mode Summary
3.7.2. Mode resume It is the sixth screen of the Home section. This screen summarizes the variable parameters from the previous screens. (Figure 4.3) Indicates the distance traveled in kilometers (km) since the last reset. Indicates the elapsed time in motion since the last reset. -
Page 17: Mode Of Assistance
3.8 Mode of assistance The system is equipped with a walking assistance function that allows you to activate the motor up to a maximum speed of 6 km/h, to make it easier to tackle short stretches by pushing the e-bike. To activate the walk assistance function, hold down the "DOWN"... -
Page 18: Menù
3.9 Menù By pressing the "UP"+"DOWN" buttons (Ref. F - G - Figure 5) simultaneously for two seconds, it is possible to open the menu screen. From any screen, by holding down the "POWER" key for 2 seconds, you can return to the last Home screen displayed. -
Page 19: Brightness Screen
3.9.1. Brightness screen From this screen you can adjust the brightness of the screen.Use the "UP" and "DOWN" keys to scroll through the values from 1 to 10. The selected value is highlighted in the middle of the white line. FIG. -
Page 20: Weight
3.9.4 Weight From this screen you can set your body weight by choosing a value between 50 and 150 kg. The setting of this datum is not necessary for the correct functioning of the eBike. The value has the sole purpose of making the calculation of calories consumed reliable. - Page 21 ERROR CODE DESCRIPTION BATTERY COMMUNICATION PROBLEM. THE DATA RELATING TO THE BATTERY STATUS MAY BE DISPLAYED INACCURATELY. CHECK THAT THE CABLES AND 0001 THE BATTERY CONTACTS ARE CORRECTLY CONNECTED AND UNINTACT. COMMUNICATION PROBLEM BETWEEN DRIVE AND HMI. CHECK THAT THE CABLES ARE CORRECTLY CONNECTED AND INCORRECT. 0101 SPEED SENSOR NOT DETECTED.
-
Page 22: Resolution Of The Problems
3.10.1 Resolution of the problems PROBLEM SOLUTION The system does not turn on Check that the battery is inserted correctly in place, and that it is charged. The assistance does not activate Check that the selected assistance level is greater than 0, and that the battery charge level is sufficient. The system has detected an anomaly. -
Page 23: Battery
3.11 Battery The bicycle provides pedaling assistance through an electric motor powered by the battery located in the down tube of the frame structure (Figure 6) 3.11.1 Battery charge status The battery charge status can be viewed directly on the assistance system management display. - Page 24 To install the battery, proceed as follows (this procedure must be performed without the release key, remove it if inserted): 1- Align the battery by matching the electrical connector first (Ref. O - Figure 8); 2- Carefully insert the battery into the frame until you hear the lock click. At this point the battery is already automatically blocked.
-
Page 25: Loading Battery
3.11.3 Loading battery The battery of the pedal assisted bicycle can be recharged in two ways. - The first by connecting the battery charger directly to the frame via the appropriate socket (Figure 9). - The second mode involves removing the battery. To charge the battery, proceed as follows: 1. -
Page 26: Resolution Of The Problems
3.11.4 Resolution of the problems PROBLEM SOLUTION RESOLUTION OF THE PROBLEMS The system does not If the assistance system does not activate Check that the battery is charged. turn on even if the battery is charged, contact your authorized dealer. The assistance do not Check that the battery charge level is sufficient. -
Page 27: Conditions Of Use And Environment Expected
4. CONDITIONS OF USE AND ENVIRONMENT EXPECTED 4.1 Expected use The pedal assisted bicycle is designed and built to be used outdoors, on roads and in private or public environments. In particular, the components and the type of pedal assisted bicycle allow you to tackle routes with asphalt or dirt surfaces without particular roughness. -
Page 28: Environment Of Use
4.3 Improper use and contoindications Le azioni qui di seguito descritte, che ovviamente non possono coprire l’intero arco di potenziali possibilità di “cattivo uso” della bicicletta a pedalata assistita, sono da considerarsi assolutamente vietate. FORBIDDEN OPERATION • Carrying out prohibited operations invalidates the guarantee; •... -
Page 29: Lifting And Transport
5. LIFTING AND TRANSPORTATION 5.1 Lifting The weight of the HYPERION model pedal assisted bicycle is such that it can be lifted and carried by one person, also due to the overall dimensions. The optimal solution to carry out the handling is to grab a handlebar grip and the rear part of the saddle. SCHIACCIAMENTO E URTO •... -
Page 30: Commissioning
6. COMMISSIONING 6.1 Battery loading Before using the bicycle for the first time, charge the battery for at least 8 hours, using the special battery charger supplied. The pedal assisted bicycle, model HYPERION, is equipped with an electric motor powered by a 36 V lithium-ion battery. The battery pack is housed in the central part of the frame, inside the oblique tube. -
Page 31: Functional Cecks Foreplay
6.2 Functional check foreplay Before each use, the driver must check the safety status of the pedal assisted bicycle. Therefore, perform the following inspections before riding the pedal assist bicycle. 6.2.1 Command devices Check the efficiency and state of charge of the battery. Use in very cold environments quickly degrades battery efficiency. Check chain tension and lubrication. -
Page 32: Position Of The Frame, Handlebar And Saddle
6.2.4 Position of the frame and saddle Check that the frame and saddle are properly secured and positioned in the most comfortable configuration for the rider to have complete control of the bicycle. Otherwise, before setting off, act on the saddle position adjustment systems. For further information on the regulation, refer to paragraph 2.5. -
Page 33: Brakes Adjustement
6.2.5 Regulation of brakes Before using the pedal assisted bicycle, adjust the position of the brake levers on the handlebar to obtain a comfortable and firm grip of the lever and knob during braking. Loosen the screw (Ref. S - Figure 11) and rotate the brake lever to the desired position. -
Page 34: Use Of The Bicycle
7. USE OF THE BICYCLE The pedal assisted bicycle was designed and built for use in open places, with asphalt or dirt roads, for amateur use. • It can only be used by experienced adults and children; • The use of the pedal assisted bicycle is not recommended for pregnant women; •... -
Page 35: Use Of The Bicycle
7.1 Use of the bicycle Before using the pedal assisted bicycle in places open to traffic, familiarize yourself with the behavior of the vehicle. The first uses must be made in private environments away from traffic, other cyclists or obstacles of any kind. The driver must adapt the speed of the pedal assisted bicycle to the road conditions and the presence of other vehicles or pedestrians. -
Page 36: Maintenance
8. MAINTENANCE 8.1 Generalities INJURY RISK During all maintenance work, follow the appropriate safety measures. All maintenance operations must be performed with the battery disconnected from the pedal assisted bicycle and from the battery charger; the bicycle must be placed in the hands is stable by taking advantage of special support elements. -
Page 37: Check Of The Brakes
8.2.3 Check of the brakes The brakes must be adjusted to ensure effective braking and, at the same time, the control levers must have an adequate stroke to be able to modulate the braking: in other words, the brakes must not be too slow or too tight. Check that the brake system discs and pads are not contaminated by oils or soaps. -
Page 38: Maintenance And Check Monthly
8.4 Maintenance and monthly checks 8.4.1 Check of theelectrical circuits and components Check the condition and fastening of the battery cables: the sheaths of the electric cables must be in good condition and the terminals must be well tightened, not corroded and covered with insulating grease. Check that all bulbs and warning lights come on correctly. -
Page 39: Technical Assistance And Spare Parts
9. TECHNICAL ASSISTANCE AND SPARE PARTS If you need technical assistance, contact your authorized dealer. In case of installation of non-original parts, the guarantee becomes void! ORIGINAL REPLECEMENT The manufacturer declines all responsibility for damages of any kind caused by the use of non- original spare parts. -
Page 40: Disposal Of Components And Materials
11. DISPOSAL OF COMPONENTS AND MATERIALS DISPOSAL OF MATERIALS The disposal of packaging, waste and vacuumed dust, of replaced parts and/or of the pedal assisted bicycle as a whole at the end of its expected life, must be carried out with respect for the environment, avoiding polluting the soil, water and air, respecting in all case the national and local legislation in force on the matter. -
Page 41: Warranty Standards
12. WARRANTY STANDARDS M.B.M. S.r.l. Unipersonale guarantees that its bicycles are free from any manufacturing or workmanship defect. This warranty covers the repair or replacement of any part recognized as defective, subject to the following conditions. TERMS AND CONDITIONS • Guarantee period: the pedal assisted bicycle is guaranteed for 24 months on the mechanical and electrical parts, except for the batteries and all the components subject to wear. -
Page 42: Conformity
• Transportation fee. Except as provided in this warranty and subject to all other warranties, MBM and its employees and agents shall not be liable for any loss or damage of any kind (including incidental or consequential loss or damage caused by negligence or default) arising out of or relating to any MBM bicycle. - Page 43 M.B.M. S.r.l. Unipersonale Via Emilia Levante, 1671/73/75 | 47521 Cesena (FC) Tel.: + 39 0547 -300364 Fax: +39 0547-304326 Email: info@mbmbike.it...
Need help?
Do you have a question about the HYPERION PLUS and is the answer not in the manual?
Questions and answers