Machine Description - Piergiacomi DPF-300 Instruction Manual

2. MACHINE DESCRIPTION

The machine (Fig.2) consists of steel frame with an ESD workbench on top, on which is installed the milling
head (cutter).
The frame is supported by two steel feet and two ESD swivel wheels with brakes for practical positioning;
the front side features an ESD connection port for the operator, thus rendering the machine compliant with
standard IEC-61340-5-1.
A removable casing containing the electrical panel is fixed with screws to the bottom of the workbench;
inside it there is the protective insulating casing of the motor spindle. On the front of the machine there are
several control devices such as a disconnect switch, a power indicator light, the machine on/off switch and
an emergency button.
MACHINE ON/OFF
SIWTCH
POWER
INDICATOR
LIGHT
DISCONNECT
SWITCH
STEEL FRAME
ESD SWIVEL
WHEEL
Fig. 2
Page 7
DPF-300
INSTRUCTION MANUAL
ESD
WORKBENCH
MILLING
HEAD
ESD
CONNECTION
PORT
EMERGENCY
BUTTON
ELECTRICAL
PANEL
PROTECTIVE
CASING
STEEL FOOT
Rev. Date: 27/01/2020
Rev.0