9. MACHINE MAINTENANCE
Make sure that the system is disconnected from the power supply before carrying
out any maintenance or adjustment work.
The machine is designed to allow easy maintenance; therefore, the electrical panel can be accessed from the
front of the machine, via the protective casing that consists of a hinged door secured with the 3 screws
indicated by the arrows (Fig.17). The motor spindle mount can also be accessed by removing the protective
casing indicated in paragraph 9.3.
Remove the 4 screws from the machine back casing to access the compartment that houses the motor, the
extraction system and the motor spindle compartment cooling fan.
Page 19
DPF-300
INSTRUCTION MANUAL
DOOR
Fig. 17
REMOVABLE
CASING
SCREW
Fig. 18
Rev. Date: 27/01/2020
Rev.0