Enviromental Impact - Piergiacomi DPF-300 Instruction Manual

7. ENVIROMENTAL IMPACT

The environmental impact of DPF-300 is minimal and has the following main characteristics:
Dust pollution:
Oil pollution
:
Noise pollution:
Heat pollution:
Page 17
DPF-300
the machine produces cutting dust that is collected by a special filter
provided with a special filter cartridge.
the machine does not use and, therefore, does not release oil
into the environment.
the machine is equipped with a motor spindle that may generate noise
up to 80 dB(A) during cutting, measured at the operator position. The
machine is equipped with a suction turbine that generates noise up to
70 dB(A), especially its rear side (that is equipped with a silencer),
measured at the operator position.
the machine features a suction turbine located inside the frame, which
generates hot exhaust air that comes out through the back of the
turbine (equipped with a silencer); also, the turbine surfaces are
subject to overheating any may reach temperatures of up to 55°C.
INSTRUCTION MANUAL
Rev. Date: 27/01/2020
Rev.0