Table of Contents
Advertisement
1. SAFETY RULES
1.1
MEANING OF THE SYMBOLS USED IN THIS MANUAL
1.2
GENERAL REQUIREMENTS
Before performing any maintenance or adjustment work, make sure that the power supply
system is disconnected.
ATTENTION:
Piergiacomi Sud S.r.l. disclaims all liability for any damage caused by the removal
or modification, without authorisation, of parts of the machine; servicing or adjusting the
machine while it is running is also forbidden.
The machine must be used for depaneling FR4/CEM or ALUMINIUM PCBs only. Any other use is
forbidden and will render the product warranty void.
Observe the instruction and warning labels on the machine.
The machine is built according to the safety criteria dictated by current regulations, indicated in the
declaration of conformity attached to this manual.
1.3
IDENTIFICATION PLATES ON THE MACHINE
Page 4
DPF-300
An exclamation mark in an equilateral triangle indicates that there are
work or maintenance instructions to be observed or situations that
are or may become particularly dangerous.
The type of risk to which the operator is subjected and the level of skill
required is also indicated.
INSTRUCTION MANUAL
DPF-300 MACHINE DATA PLATE
It is the identification plate of the machine,
bearing its main specifications and its Serial
Number.
Located at the back of the machine.
Fig. 1
Rev. Date: 27/01/2020
Rev.0
Advertisement
Table of Contents
