Routine Maintenance - Piergiacomi DPF-300 Instruction Manual

DPF-300
INSTRUCTION MANUAL
9.1

ROUTINE MAINTENANCE

DAILY:
- General machine cleaning:
- Check the level of dust inside the filter and the clogging of the filter cartridge.
- Check the wear of the cutter.
- Check the wear of the interchangeable guide.
- Check the wear of the suction tube
N.B.: Do not clean the ESD workbench with alcohol-based detergents.
Do not use liquid detergents to clean the motor spindle
PERIODICALLY (every 20-30 days):
- Check the locking screws;
- Clean the rear exhaust silencer with compressed air.
- Clean the top of the motor spindle with compressed air by removing the aluminium head
that secures the guide in place (see Chap.5).
9.1.2 SPARE PARTS
- Interchangeable guide standard thickness 1.0-3.0 mm. Code DPF-GI-X.X
- FR4 Cutters ( 10pc. Pack) standard diameters 1.0-3.175 mm. Code DPF-FF-X.X
- FR4 Coated Cutters ( 10pc. Pack) available standard diameters 2.0/2.3 mm Code DPF-FF-X.XA
- ALUMINIUM Cutters ( 10pc. Pack) standard available 1.0-3.175 mm. Code DPF-FA-X.X
- ALUMINIUM Coated Cutters ( 10pc. Pack) standard available 1.5/1.6/2.0/2.4 mm. Code DPF-FA-X.XA
- Motor spindle with centring kit Code 2431BSBPER11RH
- Filter cartridge for 1-1/4" filter Code DPF-CAR-3.0
- Suction kit with regulator Code 21192-41489
- Suction hose Ø10 Code PVCRTAGEØ10
- Black antistatic hose Ø8 Code TAV-0806-B
- Stainless steel suction tube Code DPF200-TF-005
Custom interchangeable guides available on request.
Page 20 Rev. Date: 27/01/2020
Rev.0