4.3
INSTALLATION PROCEDURE
The machine comes with all its parts already assembled and ready for use.
Before using the machine, perform the installation steps below:
Adjust the height of the 2 feet making sure that they rest correctly on the ground and secure their
position with the lock nuts;
Lock the swivel wheels using the dedicated brake;
Connect the machine to the mains (chap.4.3.1)Connect the machine to the mains;
Install the cutter and the interchangeable guide of the required size, as indicated in chap.5;
4.3.1 CONNECTION TO THE MAINS
Connect the machine to a 230V power supply line using the 2P+E (Schuko) cable and socket supplied.
Page 12
DPF-300
INSTRUCTION MANUAL
Rev. Date: 27/01/2020
Rev.0