Getting Ready - Kenwood K23MSS15E Instruction Manual

getting ready

This microwave is designed for domestic use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents on the microwave, and the door closes properly. A dented or damaged
microwave could allow microwave energy to escape. Make sure that you have taken all the
packaging from the inside of the microwave. Please dispose of the plastic wrappings or bags
safely and keep out of the reach of babies and young children.
2. Choose a flat, stable work surface for
your microwave away from heat sources
such as radiators or fires and away from
cold areas. The surface should be at least
85cm above the floor. Place the back of
GB
the microwave against a wall and allow
a 20 cm space on both sides of the unit
and 30 cm above so that warm air can
escape from the vents during cooking. This
microwave is not designed to be built in. Do
not block any intake or outlet openings as
this can damage the unit.
3. Plug your microwave into a standard
household electrical socket. Avoid using
a socket that also has an adapter and
other equipment plugged in. Do not use a
multi-adapter.
4. Put the turntable support inside the microwave
and place the glass turntable plate on top of
the support. The turntable support is shaped
to sit securely on the spindle. You must always
use the turntable plate and support whenever
you use the microwave.
5. To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
Remove the turntable plate and turntable
support before turning the microwave
upside down.
32
30cm
20cm
Underside View
20cm