Getting Ready - Kenwood KEN SJW17 Instruction Manual

getting ready

This microwave is designed for domestic use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents on the microwave, and the door closes properly. A dented or damaged
microwave could allow microwave energy to escape. Make sure that you have taken all the
packaging from the inside of the microwave. Please dispose of the plastic wrappings or bags
safely and keep out of the reach of babies and young children.
2. Choose a flat, stable work surface for
your microwave away from heat sources
such as radiators or fires and away from
cold areas. The surface should be at least
85cm above the floor. Place the back of
the microwave against a wall and allow
GB
a 20 cm space on both sides of the unit
and 30 cm above so that warm air can
escape from the vents during cooking. This
microwave is not designed to be built in. Do
not block any intake or outlet openings as
this can damage the unit.
3. Plug your microwave into a standard
household electrical socket. Avoid using a
socket that also has an adapter and other
equipment plugged in. Do not use a multi-
adapter.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
5. To protect your work surface, we
recommend that you fix some non-slip
cushion pads (not included) to the underside
of the microwave.
Remove the turntable plate and
turntable support before turning the
microwave upside down.
32
30cm
10cm
Underside View
microwave
A1
reheat
A2
vegetables
defrost
A3
10cm
sh
A4 clock/
meat pre-set
A5
pasta
A6 stop/clear
potato
A7
start/
pizza
+30sec/con rm
A8
soup
weight
timer auto
menu