Getting Ready - Kenwood K23GSS11E Instruction Manual

getting ready

This microwave is designed for domestic use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents on the microwave, and the door closes properly. A dented or damaged
microwave could allow microwave energy to escape. Make sure that you have taken all the
packaging from the inside of the microwave. Please dispose of the plastic wrappings or bags
safely and keep out of the reach of babies and young children.
2. Choose a flat work surface for your
microwave away from heat sources such as
radiators or fires and away from cold areas.
The surface should be at least 85cm above
the floor. Place the back of the microwave
against a wall and allow a 20 cm space on
GB
both sides of the unit and 30 cm above so
that warm air can escape from the vents
during cooking. This microwave is not
designed to be built in.
3. Plug your microwave into a standard
household electrical socket. Avoid using a
socket that also has an adapter and other
equipment plugged in. Do not use a multi-
adapter.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
5. To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
Remove the turntable plate and turntable
support before turning the microwave
upside down.
16
30cm
20cm
Underside View
20cm
microwave/ weight/
grill/combination time defrost
clock/
stop/clear
kitchen timer
start/
+30sec/con rm