Getting Ready - Kenwood K30CSS14 Instruction Manual

getting ready

This microwave is designed for home use only. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents, and the door closes properly. A damaged microwave could allow
microwave energy to escape. Make sure that you have taken out all the packaging from the
inside of the microwave. Please dispose of the plastic wrappings / bags safely and keep out of
the reach of babies and young children.
2. Choose a flat, stable work surface for your
microwave away from heat sources such
as radiators or fires and away from cold
areas. The surface should be at least 85cm
above the floor. You should allow a 20 cm
space all around the microwave and 30 cm
above so that warm air can escape from
the vents during cooking. This microwave
is not designed to be built in. Do not block
any intake or outlet openings as this can
damage the unit.
3. Plug your microwave into a standard
household electrical socket (230-240V~,
13 amp rated). Avoid using a socket that
also has an adapter and other equipment
plugged in. Do not use a multi-adapter.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
5. To protect your work surface, we
recommend that you fix some non-slip
cushion buttons (not included) to the
underside of the microwave.
• Remove the turntable plate and
turntable support before turning the
microwave upside down.
• Do not remove the unit's feet.
10
20cm
Underside View
30cm
20cm