HIKVISION DS-K1T320 Series User Manual page 63

DS-K1T320 Series Face Recogintion Terminal User Manual
Note
The page may vary according to different device models. Refers to the actual page for details.
Capacity
You can view the number of user, face picture, card, and event.
Note
Parts of the device models support displaying the fingerprint number. Refers to the actual page
for details.
Device Upgrade
Plug the USB flash drive in the device USB interface. Select Upgrade → OK , and the device will
read the digicap.dav file in the USB flash drive to start upgrading.
Restore to Factory Settings
All parameters will be restored to the factory settings. The system will reboot to take effect.
Restore to Default Settings
All parameters, except for the communication settings, remotely imported user information, will
be restored to the default settings. The system will reboot to take effect.
Reboot
The device will reboot after the confirmation.
Select , long press OK, and enter admin password to view device version information.
48