RETAKE (R/F) Button
To check the end of the last recording.
1) Press "
" and release quickly during the Record–
Tape is rewound for about 1 second and played
back automatically, then pauses in Record–Standby
mode for the next shot.
Distortion may occur at the start of playback. This is
To re-record certain segments.
1) Make sure the camcorder is in the Record–Standby
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing "F" forwards the tape
and pressing "R" reverses it.
3) Press the Recording Start/Stop Button to start
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.