Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
Switch off the unit's power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
REMOVE BATTERY HOLDER
Pull out the battery holder.
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to have
the "+" mark visible.
Slide the holder back into the slot until you hear a
See "SAFETY PRECAUTIONS" (
on safe handling of lithium batteries.
To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.
pg. 2) for information