Hornbach 10533559 User Manual page 17

CAUTION
When the device is turned on it can give off smoke and an odor. This is normal
and will disappear after a few minutes.
1. Turn the control knob to the desired setting:
•
ventilation mode (Figure 6, pos. 1);
•
heating mode low (Figure 6, pos. 2);
•
heating mode high (Figure 6, pos. 3).
2. Turn the thermostat knob clockwise as far as
possible (Figure 6, pos. 4)
3. The light indication turns on (Figure 6, pos. 5).
Setting temperature
When the room reaches the desired temperature in heating mode, slowly turn the
thermostat knob on the device counter-clockwise until it clicks. The device will stop heating.
The temperature is now set. The device will turn on and off automatically to maintain the
given temperature.
Motion function
CAUTION
The motion switch is only for activating and deactivating the motion function.
This switch is NOT an ON/OFF switch.
•
Switch the motion switch to the I position
(Figure 7, pos. 1). The device starts rotating
from left to right in an angle of 90°.
•
Switch the motion switch to the 0 position to
deactivate the motion function.
Figure 6
Figure 7
17