Hornbach 10533559 User Manual page 16

Installation
The device is packed in one box. Remove all packaging material and check that the device is
not damaged. Do not use the heater if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport.
WARNING
Do not use an extension cable, this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged. Use an extension
cable with a minimum power of 2000 Watt. Always unwind the extension cable
completely to prevent overheating.
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances. Always unwind the power cable completely.
1. Place the device on a level and steady
surface.
2. Place the device with a minimum distance of
1 meter to any object, wall or ceiling.
3. Do not place the device directly below a
socket outlet.
4. Make sure the control knob switch is in the
OFF position (Figure 5).
5. Put the power plug into a wall socket that is
easily accessible. Use a wall socket with a
minimum power of 2000 Watt.
Operation
WARNING
Before every use, make sure that:
•
•
•
•
16
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device stands on a level and stable surface.
Figure 5